Users can connect Enjin Wallet to confirm and sign transactions on the Enjin Platform. Users can connect Enjin Wallet to all versions of the Enjin Platform (ETH Mainnet, JumpNet, and Goerli).

Connecting Enjin Wallet to the Enjin Platform is as easy as scanning a QR code.

How to connect to the Enjin Platform

Given that you’re logged in to your Enjin Platform account, here are the steps on how to connect to your Enjin Platform project.

1. Log in to Enjin Wallet and go to the Wallet tab.

2. Tap on the QR code icon on the upper right to launch the QR code scanner.

3. On the Enjin Platform, go to the project you would like to connect to and go to its Settings.

4. Under Settings, you should see a QR code. Scan this using the Enjin Wallet app.

5. The wallet will show a list of ETH addresses in your wallet. Select the address you would like to connect on your project.

You are now connected to your project!

Connect to the Enjin Platform via Linking Code

If you are unable to scan the QR for some reason (no camera or the camera is not working properly), there is another way to connect to the Enjin Platform using the connection code on the Enjin Platform.

Once again, given that you are logged in to your Enjin Platform account, here are the steps on how to connect to your Enjin Platform project.

1. Log in to Enjin Wallet then go to the Wallet tab.

2. Tap on the ⚙️ gear icon on the upper right.

3. Tap on Wallets and choose the wallet you would like to connect on the Enjin Platform.

4. Look for the address you would like to connect to the Enjin Platform and tap the Edit icon.

5. Tap on Linked Projects.

6. Down below, tap on the Link Project button.

7. On the Enjin Platform, go to the project you would like to connect to then go to Settings.

8. Under Settings, you should see a Linking Code just above the QR code.

9. Go back to the Enjin Wallet app and type in the Linking Code then click the Link Project button.

After signing and approving the action, you are now connected to to your project! Take note that you can also scan the QR by tapping on the QR icon in the Type Project Link Code section.

Alternate way to connect to the Enjin Platform

1. Log in to Enjin Wallet then go to the Wallet tab.

2. Tap on the address you'd like to connect to the Enjin Platform. For this example, we're choosing ETH/ENJ address 43da.

2. Tap on the 3 dot menu on the upper right corner then choose Linked Projects.

3. Down below, tap on the Link Project button.

4. On the Enjin Platform, go to the project you would like to connect to then go to Settings.

5. Under Settings, you should see a Linking Code just above the QR code.

6. Go back to the Enjin Wallet app and type in the Linking Code then click the Link Project button.

After signing and approving the action, you are now connected to to your project! Take note that you can also scan the QR by tapping on the QR icon in the Type Project Link Code section.

How to Unlink from the Enjin Platform

Similar in connecting to the Enjin Platform, there are also multiple ways to disconnect from the Enjin Platform.

The quickest way to unlink your wallet from the Enjin Platform is by going through the Settings of your project and click on the Unlink Wallet button.

From there, your wallet should be disconnected from the Enjin Platform.

Unlink from the Enjin Platform through the Wallet Settings

Another way to unlink your wallet from the Enjin Platform is through your Enjin Wallet app.

1. Log in to Enjin Wallet then go to the Wallet tab.

2. Tap on the ⚙️ gear icon on the upper right of your screen.

3. Tap on Wallets and choose the wallet you would like to connect on the Enjin Platform.

4. Look for the address that is currently connected to the Enjin Platform and tap the Edit icon.

5. Tap on Linked Projects.

6. Tap on the project you would like to unlink and tap Unlink Project to confirm.

. 

Your wallet is now unlinked from the Enjin Platform!

Alternate way to unlink from the Enjin Platform

1. Log in to Enjin Wallet then go to the Wallet tab.

2. Tap on the address that's currently connected to the Enjin Platform. for this example, we're using JumpNet account Fd00

3. Tap on Linked Projects

4. Tap on the Project you'd like to disconnect. For this example, we'd like to disconnect Wallet V2 Project.

5. Tap on Unlink Project then tap on Confirm

Your wallet is now unlinked from the Enjin Platform!